Hermes I


Delft University of Technology, Netherlands

The Hermes I is a one passenger co-axial Vertical Take-Off and Landing (VTOL) vehicle being developed by Delft University.

The Hermes I will use co-axial vertical composite propellers for lift. While cruising and landing these rotors will be in a “controlled auto-gyro” mode (which can also be employed for emergency landings). Propulsion will come from two tilting electric ducted fans on its tail. The Hermes uses a propeller aircraft engine and adjustable power-belts. It will be capable of a 40 km range and 30 minutes of flight with a 90 kg passenger. It currently has an open cockpit and the controls are designed to be simple and intuitive, although the tilt motors will be able to automatically adapt to sudden wind gusts. The bulk of the vehicle is composite and carbon fiber. The noise signature is designed to be extremely low and the team hopes to achieve near zero emissions in the near future. The entire unit is designed for a compact size and radius.

The Hermes would be utilized for urban mobility, single emergency responder transport into difficult to reach areas, and for tourism.

Delft University of Technology started Project Talaria in November 2017 to develop a personal flying device. After a number of options were considered the result was the Hermes I.

Project Talaria is an entry into the GoFly competition, sponsored by Boeing. The competition is to design and develop a personal flying device capable of taking off and landing vertically and to fly at a minimum of 80 km/h for 30 minutes. The Hermes will compete in October 2019 against other teams from around the world.

Talaria refers to the winged sandals of the Greek God Hermes.

Hermes I team



AeroDelftHover Bikes/Devices1 PassengerInitial Design, Electric HybridPilotedGoFly