Hover Bikes/Devices

  • ElectraFly ElectraFlyer



    Salt Lake City, Utah, U.S.A.

    <p style="margin: 0in; margin-bottom:...

  • Talaria Hermes I

    Hermes I


    Delft University of Technology, Netherlands


    The Hermes I is a one...

  • Horus Hoverbike

    Horus Hoverbike
    Sherbrooke, Québec, Canada

    The Horus Hoverbike is a prototype gasoline powered two rotor flying motorcycle-like sports bike being developed for a single passenger.

    The vehicle employs a single two 4 stroke 112 kW Yamaha Apex 4-Stroke / 998cc engine powering forward and rear 1.6 m rotors set 2.7 m apart and capable of 2,450 RPMs. The bike’s overall length is 4.5 m with a width of 1.9 m and a height of 1.2 m. It is...

  • HoverSurf March 2018

    FAA Confirms Hoversurf S3 is Ultralight

    A third eVTOL has been acknowledged by the FAA as a Part 103 ultralight, according to a Hoversurf news release on Sept. 28, 2018: "HOVERSURF has met FAA part 103 guidelines for a personal Vertical Take - Off and Landing aircraft." (Originally this was posted as "Hoversurf just became an approved personal Vertical...

  • Assen A1 mockup

    Assen A1

    Assen Aeronautics
    Miami, Florida, USA

    The Assen Aeronautics A1 flying hoverbike is a hybrid electric Vertical Take-Off and Landing (VTOL) personal flying device initially made for recreation and sports.



  • Electric Jet EJ-1

    Electric Jet Aircraft
    Anderson, Indiana, USA

    The EJ-1 was a submission for Boeing's GoFly prize, which built off of 11 years of development by Electric Jet Aircraft on a gas-powered Vertical Take-Off and Landing (VTOL) concept.

    The jetpack has a base weight of 31 kg. With a thrust of 178 kg it can lift a pilot of up to 131 kg (300 lbs) for 2-14 minutes depending on their...

  • NASA Puffin

    Hampton, Virginia, USA

    NASA’s Puffin is an electric Vertical Take-Off and Landing (VTOL) tail-sitting personal flying device.



  • Hero Flyer Hovering

    Hero Flyer (Defunct)

    Hero Flyer
    Kingman, Arizona

    The Hero Flyer is a 16-rotor flying platform that is set-up with eight arms each with two propellers. The device folds up for easy transportation, and is modular by design. This means that if one motor or battery fails, the device can still safely land. All of the wiring between motors occurs within the aluminum frame, leading from each arm to the batteries in the base. This device was designed for the entertainment and...

  • The preliminary design for the Mamba

    University of Kansas Mamba

    University of Kansas
    Lawrence, Kansas, USA

    The Mamba is a hexcopter emphasizing safety, certifiability, and performance. Shrouded rotors and a tilting empennage are incorporated. On June 14, 2018, it was selected as a Phase 1 winner of the GoFly competition.



    • Search eVTOL.news posts
    • News Release: GoFly Winners, GoFly, June 14, 2018
    • Article: Boeing’s $2 Million...
  • Trek Aerospace FlyKart 2

    FlyKart 2
    Trek Aerospace
    Folsom, California USA

    FlyKart 2 is a single-seat, open-cockpit, 10-rotor, ducted fan, electrically-powered, VTOL aircraft. On June 14, 2018, it was selected as a Phase 1 winner of the GoFly competition.

    Specs: Width: 2 m, Length: 1.95 m, Height: 1.2 m, Max Speed: 102 km/h, Cruise Speed: 83 km/h, Cruise Endurance: 30+ mins, Battery Pack: 9.6 kWh, Safety Features: Redundant propulsion/battery/auto-pilot, screened propellers,...